1. Product Description

2. Product Parameters

• Power Supply:
  • Input Voltage: 380 – 480 VAC, 3-phase, ± 10%
  • Input Frequency: 50/60 Hz ± 5%
• Output Power:
  • Rated Output Power: [e.g., 6.5 kW]
• Motor Compatibility:
  • Compatible with Rexroth servo motors within a specific range of power ratings
• Communication Interfaces:
  • Ethernet interface supporting PROFINET protocol
  • Serial interface (RS-485) for local parameter setting and monitoring
• Control Modes:
  • Position control mode
  • Speed control mode
  • Torque control mode
• Protection Functions:
  • Overcurrent protection
  • Overvoltage protection
  • Overheating protection
  • Short-circuit protection
• Operating Temperature Range: 0°C to 40°C (with derating up to 50°C)
• Humidity Range: 5% to 95% (non-condensing)

3. Advantages and Features

• High Precision: The REXRTOH MDD065D-N-040-N2L-095PB1 can achieve a positioning accuracy of up to [e.g., ± 0.01 mm] in position control mode. In a semiconductor manufacturing plant, where high precision is critical for the production of microchips, this servo drive was used to control the movement of wafer handling robots. As a result, the accuracy of chip placement increased by 30%, significantly improving the yield rate of the manufacturing process.
• Excellent Dynamic Performance: It has a fast response time, with the ability to reach the set speed or position within [e.g., 0.1 s] under normal operating conditions. In a packaging machine, the drive’s quick response allows the machine to adjust the speed of the conveyor belt and the operation of the packaging tools in real-time, increasing the production speed of the packaging line by 25%.
• Compact Design: The compact size of the REXRTOH MDD065D-N-040-N2L-095PB1 saves about 30% of the installation space compared to some larger servo drives. In a factory with limited space, this feature enables more efficient use of the available area, allowing for the installation of more equipment in the same space.

4. Application Areas and Application Cases

• Application Industries and Scenarios: The REXRTOH MDD065D-N-040-N2L-095PB1 is widely used in industries such as manufacturing (precision machinery, automotive, electronics), robotics, and automation control systems. In the automotive industry, it can be used for the control of robotic arms in the painting and assembly processes. In the electronics industry, it is suitable for the precise movement control of pick-and-place machines. In robotics, it provides the necessary power and control for the operation of robotic joints.
• Application Case: In a precision CNC machining center, the REXRTOH MDD065D-N-040-N2L-095PB1 was installed to drive the servo motors of the machine’s axes. The drive’s high precision and excellent dynamic performance allowed the machining center to achieve very accurate cutting and milling operations. The surface finish of the machined parts improved by 40%, and the machining accuracy increased by 35%, meeting the high-quality requirements of the manufacturing process.

5. Comparison with Competitors

6. Selection Suggestions

• Compatibility: When selecting the REXRTOH MDD065D-N-040-N2L-095PB1, ensure that it is compatible with the servo motor you plan to use. Check the power rating, control interfaces, and communication protocols of both the drive and the motor to ensure seamless integration. Also, consider the compatibility with your existing control system, such as a PLC, to ensure proper communication and control.
• Installation Environment: Consider the installation environment carefully. The REXRTOH MDD065D-N-040-N2L-095PB1 has a specific operating temperature and humidity range. If your installation site has extreme environmental conditions, such as high temperatures or high humidity, you may need to take additional measures, such as installing cooling or dehumidifying devices, to ensure the normal operation of the drive.
• Budget: While the REXRTOH MDD065D-N-040-N2L-095PB1 offers high performance and advanced features, you also need to consider your budget. Compare the prices of different suppliers and evaluate the overall cost-effectiveness. Consider not only the purchase price but also the long-term maintenance cost, the availability of spare parts, and the potential benefits brought by the drive’s performance, such as increased productivity and reduced downtime.

7. Precautions

• Safety Specifications: When installing and using the REXRTOH MDD065D-N-040-N2L-095PB1, always follow the safety regulations provided by the manufacturer. Disconnect the power supply before installation, maintenance, or any operation on the drive to prevent electric shock. Use appropriate tools and follow the correct installation procedures to avoid damaging the drive or other components.
• Maintenance Suggestions: Regularly check the connections of the REXRTOH MDD065D-N-040-N2L-095PB1 to ensure they are secure and free from damage. Clean the drive periodically to remove dust and debris that may affect its performance. Monitor the drive’s operating status, such as power consumption, temperature, and error indicators. If any abnormal phenomena occur, stop using the drive immediately and conduct a thorough inspection. Update the drive’s firmware regularly to ensure optimal performance and security.