Product Parameters: Brand: BENTLY Model: 3500/15 106M1079-0 Type: Machinery monitoring system Power supply: 90-264 VAC, 47-63 Hz, 50 VA max Operating temperature: -20°C to 70°C Storage temperature: -40°C to 85°C Weight: 0.76 kg Product Description: The BENTLY 3500/15 106M1079-0 is designed to monitor a wide range of machinery, including turbines, compressors, pumps, and motors. It…
Parameters and specifications Input voltage range: 12-48VDC Output voltage range: 5VDC Output current: Max. 10A Efficiency: greater than 90% CPU: 32-bit RISC processor Operating System: 3500 safety monitoring system (for some modules) Size and weight Dimensions: 170mm x 105mm x 32mm Weight: About 120g trait Filter circuit: used to eliminate the jitter of the input…
trait Transient Data Interface (TDI) : An interface between a 3500 monitoring system and compatible software that combines the capabilities of a 3500/20 rack interface module (RIM) with communication and data collection capabilities Continuous collection of steady-state and transient dynamic (waveform) data: and link to host software via Ethernet Alarm function: May include light alarm…
The Bently 3500/50 133442-01 is a DCS (Distributed Control System) PLC (Programmable Logic Controller) Module used for monitoring and control in industrial applications. Unfortunately, as an AI language model, I don’t have access to a specific product database, so I can’t provide precise specifications for this module. However, I can provide some general information about…
Parameters and Specifications: Manufacturer: Bently Nevada Series: 3500 Input Signal: -10 Vdc to +10 Vdc Power Consumption: 7.7 Watts1 Shaft Power: -24 Vdc Sensor Power: -24 Vdc Operating Temperature: 25°C1 / 0°C to 50°C2 Dimensions and Weight: Length: 9.50 inches (241.3 mm) / 10.5 inches (267 mm)12 Width: 4.50 inches (114.3 mm) / 5.5 inches (140…
Parameters and Specifications: Measurement Range: 0-5 g Resolution: 0.01 g Sampling Frequency: 10 kHz Output: BNC interface, analog signal output Power Supply: Via connection to acquisition system or external battery Operating Temperature Range: -18°C to +60°C Storage Temperature Range: -40°C to +85°C Dimensions and Weight: Dimensions: 97mm x 45mm x 24mm (Length x Width x…
Parameters: Power supply voltage: 24 VDC Operating temperature: -40℃ to 85℃ Signal output: Using 4-20 mA current output and Modbus communication protocol Specifications: Number of channels: There are 16 separate relay output channels, each of which can be programmed independently to perform the required voting logic Relay contact rating: 25A at 250 VAC or 30A…
The BENTLY 3500/22M is a transient data interface module commonly used in BENTLY (now part of General Electric) mechanical equipment monitoring and vibration analysis systems, such as the BENTLY 3500 series vibration monitoring system. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions: Parameters and specifications: Measuring range:…
BENTLY 125680-01 is a fault-safe temperature transducer manufactured by Bently Nevada. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English: Parameters & Specifications: Function: It converts temperature signals from sensors such as thermocouples or thermal resistors into standard output signals for monitoring and control in industrial automation systems.…
BENTLY 3500/33 149986-01 is a product that typically finds applications in industrial automation and control systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English: Parameters & Specifications: Input Voltage Range: DC 24-75V. This defines the range of voltages that can be safely used as input for the…